How do I integrate a power meter into Flight Attendant if I already own a Flight Attendant system with pedal sensor?

First, you will need to make sure your firmware is up to date, depending on what damper you have:

• Charger Race Day 2 Flight Attendant: Version 2.44.6 or later
• Charger 2.1 Flight Attendant: 2.44.7 or later
• All Flight Attendant rear shocks: 2.44.6 or later

For spindle-based power meters: The system will need to be paired again using the power meter sled rather than the pedal sensor. The SRAM AXS app Bike Garage should update to reflect the paired components.

For spider-based power meters: The system will need to be paired again, but leave the pedaling sensor out. The system should end up in Manual Mode. Open the SRAM AXS app and connect to the fork Control Module. The app will show an alert that there is no pedal sensor connected. Tap “Add Pedal Sensor”. Select SRAM/Quarq from the Pedal Sensor drop-down menu. Locate and then enter the serial number from the power meter. For detailed instructions, check out the Flight Attendant User Manual
and Flight Attendant videos.