PROBLEM
When the battery is installed, the system should smoothly complete the homing process. Continuous vibrating or soft clicking noises coming from the fork Control Module or Rear Shock Module indicates that the component cannot complete the homing process.
POSSIBLE CAUSE
The module may not be installed correctly.
TROUBLESHOOTING
Lightly loosen the control module screws, then remove and re-install the battery. Verify the homing process is smooth, then evenly re-tighten the mounting screws to the torque value specified in the service document for your product.
OUTCOMES
1. All is well, go ride!
2. The soft clicking and vibrating continue. Reach out to your point of purchase for assistance.