PROBLEM
If the Open, Pedal, and Lock LEDs on the Fork Control Module are pulsing red, there was an error during calibration.
POSSIBLE CAUSES
The system times out, and calibration was not successful after 25 seconds during verticle or tilt calibration.
The system exited calibration because a button on the Fork Control Module was pressed during the calibration.
TROUBLESHOOTING
Restart the calibration process once the red LEDs stop pulsing.
OUTCOMES
1. The system calibrates successfully and enters Auto Mode (green pulsing LED). All is well, go ride!
2. The system cannot be placed into Auto Mode. Reach out to your point of purchase for assistance.